If water is continually entering your basement or cellar, installing a sump pump might be the best solution. Any area below the water line in your home is susceptible to flooding, especially during wet weather. The water can seep through the cement in your basement walls and floors or come from plumbing malfunctions such as a pipe bursting. The term "sump" means a pit or hole and is generally located in your basement to gather and pool water in one specific area. A properly installed sump pump for your basement can remove unwanted water to an area outside your home protecting your home from flooding.

Types of Sump Pumps

The majority of homeowners have either a submersible sump pump or a pedestal sump pump.

Submersible sump pumps are complete submersed under water in a sump pump pit. The mechanical components are fully contained within the unit to keep them safe from water damage. They are less noisy and harder to repair.
Pedestal sump pumps are not supposed to come in contact with water so the sit on a pedestal that is located above the sump pump pit. Because they are not under water, pedestal sump pumps are easier to access and repair. However, they can take up more space, be ugly, and very noisy.

Learn more on how to find a quality sump pump so you can be confident that you purchase the right one for your needs.

Sump Pump Installation

Sump pump installation can be a challenging task. If you're not comfortable with home repairs, consider hiring a licensed plumbing specialist to help. They can help you understand more about your specific needs and even help pick a sump pump. Sump pumps can be purchased at your local hardware or home improvement store or online.

Sump Pump Maintenance

If you perform regular sump pump maintenance, you are extend the life of your sump pump and ensuring that it will function properly. Most maintenance entails cleaning your sump pump, checking it's working parts, and running a water test.

It is common to see sump pumps valves malfunction, floats get tangled, or even an electrical shortage. Careful inspection and routine maintenance will ensure you're basement is protected. In some cases, sump pump repair will be required by a professional or you might need to install a new sump pump altogether.

Little Giant WRS-6, 1/3 HP, 45 GPM @ 5'- Submersible Utility Pump, Water Removal System w/ 5 gal. tank. & 8' power cord (506055)

Little Giant WRS-6, 1/3 HP, 45 GPM @ 5'- Submersible Utility Pump, Water Removal System w/ 5 gal. tank. & 8' power cord (506055) Drainosaur® Water Removal System Includes 5-gallon polypropylene tank. Tank lid has 1 1/2" FNPT (38.1mm) side intake port, 1 1/2" FNPT (38.1mm) top discharge port, and 2" FNPT (51mm) top vent port. Easy-to-remove filter trap. Also includes 3/10 HP automatic submersible sump pump with 8' (2.4m) power cord and 3-prong grounded plug; and 1 1/2" (38.1mm) diameter pipe from pump to lid. Basin is IAPMO approved. Little Giant WRS-6, 1/3 HP, 45 GPM @ 5'- Submersible Utility Pump, Water Removal System w/ 5 gal. tank. & 8' power cord (506055) Features: • 3/10HP Shaded Pole Motor • 46 GPM/174 LPM • 18'/5.5m Maximum head • Intermittent Liquid Temp. up to 125°F • 1 1/2" FNPT (38.1mm) Discharge • Epoxy coated cast iron housing • Polycarbonate Cover • Polypropylene Volute • Nylon Impeller • Carbon/Ceramic Shaft Seal • Upper and lower, Sintered sleeve bearings • Automatic Operation • Diaphragm switch Activator • Switch on - 7" - 10"/17.8cm - 25.4cm • Switch off - 1" - 4"/2.54cm - 10.2cm • 115V, 50/60Hz, 9 amps, 8' (2.4m) power cord • IAPMO Approved Basin Little Giant WRS-6, 1/3 HP, 45 GPM @ 5'- Submersible Utility Pump, Water Removal System w/ 5 gal. tank. & 8' power cord (506055) Specifications: • Flow 2750 ft. @ 5' of Head • Cord Length 8' • Shut Off 18' • Voltage 115 • Hertz 50/60 • Amps 9 • Watts 720 • Weight 26 • Height 15.56 • Width 14.5 • Length 14.5

Little Giant SPBS-12, 12 Volt DC Sump Pump Back-Up System (506400)

Little Giant SPBS-12, 12 Volt DC Automatic Sump Pump Back-Up System (506400) The SPBS-12 provides extra protection in the event the primary sump pump fails, an obstruction in the sump pit blocks flow, or a power outage occurs. It will also function as an alarm system if the primary pump fails to empty the sump pit. The back up system is powered by a 12 VDC battery (not included). The battery should be a deep cycle marine battery rated 105 to 140 amp-hours. (A 140 amp-hour battery can provide in excess of 9 hours of continuous operation.) A controller/charger monitors the battery condition and charges the battery when required. It will alert the homeowner if there is a problem with the battery not charging. The Little Giant SPBS-12, 12 Volt DC Automatic Sump Pump Back-Up System is a 12 VCD pump that is designed to be a portable sump pump. It pumps out with a flow of 1360 GPH with a 5Ã¢ÂÂ head connected to the pump. The pump has a float switch that keeps the pump running until the water is low enough to stop pumping. Little Giant SPBS-12, 12 Volt DC Automatic Sump Pump Back-Up System (506400) Features: • 12 VDC Pump • Controller/Charger/Alarm, 10 Amp With 6' Power Cord • Float Switch • Check Valve for 12V Pump • PVC Tee for connection to existing 1 1/2" discharge pipe of primary pump • Battery Box (battery not included) • Pump mounting bracket and clamps Little Giant SPBS-12, 12 Volt DC Automatic Sump Pump Back-Up System (506400) Specifications: • Flow 1,360 GPH @ 5' of Head • Cord Length 6' • Shut Off 21' • Voltage 120 • Hertz 60 • Amps 2 • Watts 230 • Weight 17.5 lbs. • Height 6" • Width 4.25" • Length 5.1"

Zoeller 912-0007 Job Ready Simplex Sewage Package System Pump Poly Foam Basin

Zoeller 912-0007 Job Ready Simplex Sewage Package System Pump Poly Foam Basin When you have residential or commercial wastewater issues, you can count on Zoeller Pumps to deliver the very best solutions-our commitment to top quality offers you years of service and durability Zoeller 912-0007 Job Ready Simplex Sewage Package System Pump Poly Foam Basin Features: • 2" PVC Discharge Pipe • 2" Vent • Check valve options - 30-0151, 30-0020, 30-0021, 30-0101 or 30-0103 (Not Included). • M264 Waste-Mate 0.4 HP Sewage Automatic Pump • Non-Clogging Vortex Impeller Design • Float operated, submersible (NEMA 6) 2-pole switch • Stainless steel screws, bolts, handle, guard, arm and seal assembly • UL Listed 3-wire cord and plug. 15 ft. cord standard • Corrosion resistant powder coated epoxy finish • Motor - .4 HP 115V, 1Ph., 60 Hz, 1725 RPM, oil filled PSC motor, hermetically sealed, automatic reset thermal overload protection • On point - 12 1/2" Off point - 4 1/2" • Passes 2 inch spherical solids • Zoeller recommends a High Water Alarm for added protection